Mejorstyle.com – Wire closet shelving is popular since it is easy to install, flexible and also inexpensive. The wire shelving is designed to meet any of your needs at built-in system fraction. While you are learning how to install it, you don’t really need to be a professional first to get it done. When it comes to install wire shelving in your closet, there are several things you will need to consider.
Purchase extra pieces
Even though you just plan to install one wire shelving, you will also need to have some extra parts on your hand. As you know, it will take lots of time to return the wall clips than stop it to work. As your plan is able to change, you will need to purchase some extra pieces to prevent unexpected things in the future.
Wire shelving safety
Most specification on wire closet shelving is able to support more than eight hundred pounds capacity. However, there are some safety issues you have to notice.
Try to distribute the weight lightly.
Putting all of your items within the shelving center is not really recommended. It can compromise the support of truss as well as causing the shelf collapse.
Wire shelving for closets
Storing some heavier items on the lower shelves
Storing your heavier items on the lower shelve will be able to create a gravity center within your wire shelving.
As you know, wire closet shelving is such a great idea for areas where some items are typically located. The concept of open shelving is a cool idea as it will allow the water to flow within the shelves as well as reducing fire hazard.
Consider using mounting brackets
By using mounting bracket, you will be able to minimize the shelving units from tipping. They can actually be drilled on the wall with appropriate screws as well.
Adjusting the level
Take a moment to adjust the level of your wire shelving unit. Uneven height will be able to contribute the units to tipping. In case you need to replace the leveling feet, consider looking for some specialized accessories for wire shelving for more secure units.
Using template on the end of the brackets
Template is used to secure the brackets from falling down or tipping. You should consider using built-in template to allow you to drill the holes easier. Bear in mind that the template should be placed on the end as it will support the bracket quite well.
Clips on the back of the wall are actually designed to support the shelving mechanism. To keep them in place, it is recommended to install a retaining clip in the middle of the shelving. It will be enough to place one clip in the middle of the shelf as well. It is not necessary to hit the stud when it comes to install the clips on the back of the wall as it can slow down the process. Drill about ¼ inch with the hole to preload the pushpin within the push tool. It will not slip off the wire closet shelving pin if they are set on the dry wall instead.